User Manual; RECI W6 Yongli-280W 300W + 60W 80W 100W CO2 sealed glass tube; Taiwan PMI Linear Rail & TBI Ballscrew; Ruida 6332M controller; Omron limited; Schneider breaker; USA IIVI mirrors lens; Japan panasonic servo motor; Protector glasses
Godworker New sollutions for clients, this machine install 2 heads, 280W laser for cutting metal & thickness nonmetal materials, 60W for engraving objects. It can solve that use too strong power tube for engraving to harm laser tube lifetime problem.
1. Mixed-cut: metal-Stainless steel,carbon steel and non-metal-acrylic,board.
2. High precision: Adopt Japan Panasonic servo motor with PMI Linear Rail + gear rack transmission greatly improve the response speed & cutting precision of equipment, extend the time of using.
3. Constant light system :The machine uses the constant light,achieving high precision cutting of the whole area.
4. High precision and stability: with precision Helical Gear Rack & PMI Linear Rail transmission mechanism and optimized the Ruida RDC 6332M system control, it can meet the precision parts processing ,stable dynamic performance, also can work for long hours.
5. The cutting section with good quality: mechanical follow-up cutting head system : cutting head always follow the material to keep the cutting point location unchanged, which insures smooth cutting section without processing again .It can adapt to flat or curved surface sheet cutting.
6. Adopt Yongli / RECI sealed CO2 laser tube, main consumable items are electric energy, water-cooling,auxiliary gas and laser light.
7.Stronger structure 3.2mm steel,easy operation, stable laser device & low maintenance cost.
1) Applicable industry:Mainly used for advertising industry (stainless metal and carbon steel),sheet metal industry (carbon steel), packaging industry (die board) and so on .
2) Applicable materials:acrylic, stainless steel ,carbon steel,MDF,die board.
3) Applicable show: metal spectable frame,furniture plate cutting,MDF photo frame cutting, building model cutting.
Engraving and Cutting Area
Laser wave & Tube type
10.6um CO2 sealed glass tube
Laser tube Power
Yongli-280W/300W + 60W/80W
Water chiller CW6000
Minimum Character Size
English:1mm ; Arabic numbers:1mm
File output mode
2.0 USB interface
Support Format and Software
PLT,DST,DXF,DWG.CDR, AI, Auto CAD, Coreldraw, Photoshop, Metalcut
Working Environment Temperature
Japan PANASONIC servo motor + Driver
Taiwan PMI Linear rail + TBI Ballscrew
Ruida 6332M DSP offline control system
Exhaust smoke system
Big exhaust fan
2 years for machine, 10 months for tube
Plywood case with steel tube
7--12 working days after received the deposit
Machine parts details:
2 laser heads: one is special laser head with auto focusing system for cutting, another is normal laser head for engraving.
Each metal and non-metal mixing machine we will be equipped with two sets of metal nozzles,The metal cutting nozzle has a smaller hole diameter and a higher height, while the non-metal cutting nozzle has a larger hole diameter and a lower height.
Adopt Japan top brand PANASONIC servo motor and driver, it can run reliable and has high precison.
Machine equipped with Taiwan TBI ball screw and PMI linear rail, it is mainly for ensuring higher precision for cutting.
The control cabinet mainly includes a Ruida 6332M control board card, a Live-Focus-System control board card, four drivers, and a 48V supply to power the driver, a 24V supply to power the control card, two voltage filter, Schneider breaker.
Adopt S&A water chiller, It can continue to cool the laser so that the laser can continue to work efficiently.
Laser power supply has good quality and stable output to extend the laser tube service time.
RECI-150W / 180W CO2 sealed glass laser tube and Yongli-280W / 300W combined CO2 laser tube, able to cut most non-metal materials, such 30--35mm acrylic, 20--26mm wood, 15--22mm MDF, 25--30mm plywood, plastic, paper, cardboard, PVC, rubber, cloth, leather, etc. and 3mm stainless steel, carbon steel, 2mm galvanized steel.
Front panel Ruida 6332M,you could adjust cutting speed and power from here.
Color screen on the right side of the machine, you can switch metal cutting and nonmetal cutting from here.
Blade work table with tweezers anti-static from machine, blade table suitable for hard materials, such as acrylic, wood, steel, spong, etc.
USA IIVI mirrors and lens:
Stepper motor + Belt: